HomeProductsSensorsMagnetic sensors

SYCT-3PSF Series

Production
High Accuracy Galvanically Isolated Hall Current Sensor IC
Datasheet
SYCT-3PSF Series High Accuracy Galvanically Isolated Hall Current Sensor IC Datasheet
    Part NumberSYCT-3PSF Series
    ArchitectureBidirectional/Unidirectional
    Current Sensing Range (A)±50/±100/±150/±200/±250
    Sensitivity Sens(Typ.) (mV/A)
    Isolation Voltage (Vrms)4800
    BW (kHz)170
    Response time (μs)3
    Supply Voltage (V)3.3
    Zero Current Output Volt. (V)0.5/ 1.65/ Vcc/2
    Temp Range-40 °C to +125°C (150A@ -40 °C to +105°C；200A/250A/400A@ -40 °C to +85°C)
    PackagePSF
    • 3.3V single supply
    • Wide Hall current sensing range:
    •  - Bidirectional: ±50 ~ ±250A
    •  - Unidirectional: 50 ~ 250A
    • 170kHz typical bandwidth, response time 0.7μs
    • UL60950-1(ed.2) certified
    •  - Dielectric Strength Test Voltage =4800VRMS
    •  - Working Voltage for Basic Isolation=700VRMS
    •  - Working Voltage for Reinforced Isolation = 450VRMS
    • Ultralow primary conductor resistance for power loss
    • Factory-trimmed for high accuracy
    • Package: PSF

    The SYCT-3 is a family of high accuracy galvanically isolated Hall-effect current sensor ICs for ±50A to ±250A. Current sensing supports both unidirectional and bidirectional, DC and AC currents. Applied current generates a magnetic field, then converted into a proportional analog voltage. The bandwidth is up to 170kHz and the response time is 3μs. 

    The SYCT-3 provides a ratiometric or fixed zero current output for differential measurements. A precise, proportional output voltage is achieved by the high accuracy, good linearity, low temperature drift Hall IC, which is programmed for accuracy at the factory. 

    The package offers four options, PFF/PSF/PSS/SMT, for easy implementation, which the PFF is the standard package.

    The SYCT-3 is suitable for insulation, small size with low heat generation applications, including automotive, industrial, and communications systems.